Table Pedestal Base Indoor Cast Iron Restaurant Table Base 720mm
Table Pedestal Base for Indoor Dining and Restaurant Tables
Model TB004 is a cast iron table pedestal base built for commercial indoor use. It stands 720 mm high on a 410 x 410 mm footprint, carries a 250 x 250 mm top plate, and is matched to round tops from 400 to 500 mm. The matte black powder coating is applied over solid cast iron, so the base holds its finish through daily service in restaurants, cafes and bistros.
Buyers usually reach this page looking for a metal table base that will not wobble under a loaded top. The weight is the short answer: at 17 kg the base resists tipping when a diner leans on the table edge, which is the failure mode that ends the life of most lightweight pedestal table bases.
Why Specifiers Choose This Indoor Cast Iron Table Base
Four properties that decide whether a commercial table base survives its first year.
17 kg ballast
Mass in the foot is what stops a table tipping. Cast iron delivers it without a wider footprint that diners would kick.
Powder coated finish
Matte black powder coating resists the scuffing, cleaning chemicals and chair contact that strip painted table bases.
Sized for round tops
The 410 mm square foot is matched to 400 to 500 mm round tops, keeping the base near half the top diameter.
Two-part packing
Column ships separate from base and top plate, which lowers volumetric freight cost on container quantities.
Metal Table Base Specifications
Confirmed production figures for model TB004.
| Model | TB004 |
|---|---|
| Table base height | 720 mm |
| Footprint | 410 x 410 mm |
| Top plate | 250 x 250 mm |
| Weight | 17 kg |
| Round top size | 400 to 500 mm |
| Material | Cast iron |
| Finish | Matte black powder coating |
| Base type | Single-column pedestal table base, indoor dining table base |
| Applications | Restaurant, coffee shop, cafe, bistro, diner |
| Customization | OEM and ODM on height, finish and top plate |
How to Match Base Size to Your Table Top
The most common sizing mistake is pairing a small base with an oversized top. The working rule used across the commercial furniture trade is that a round table base should measure roughly half the diameter of the top it carries.
400 to 500 mm round top
The intended match for TB004. The 410 mm footprint sits at or just above half the top diameter, giving a stable overhang on every side.
Tops above 500 mm
Overhang grows and edge loading increases the tipping moment. Move to a larger footprint or a four-prong base rather than forcing this model.
Height planning
720 mm is standard dining height. Add the thickness of your top to get finished table height, and confirm chair seat height against it.
Working out dining versus counter and bar heights? See our guide on counter height vs bar height.
Where This Table Base Is Used
Restaurants and diners
Supplied as table bases restaurant operators can pair with their own laminate, solid wood or stone tops. Table bases only, no tops included.
Cafes and coffee shops
A single-column cafe table base frees the floor under the top, which matters when seating density is tight and chairs move constantly.
Hospitality fit-outs
Repeat orders of the same model keep every table in a venue at identical height and finish across phased rollouts.
Packaging and Installation
Split carton packing
Base and top plate travel together in one carton; the column is packed separately. Bubble wrap protects the coated surfaces in transit.
Assembly on site
The base arrives complete with the fixings needed to join column, foot and top plate. No drilling or welding is required at the venue.
Freight efficiency
Flat-packing the column away from the foot reduces cubic volume per set, which is the main cost driver on full-container shipments.
Custom drawings
If TB004 does not suit your top, send the top size and required height and we will return a drawing for a matched base.
Related Table Bases and Legs
Other configurations produced in the same factory.
Common Questions About Pedestal Table Bases
What size table top fits this pedestal base?
TB004 is matched to round tops between 400 and 500 mm. The 410 x 410 mm footprint keeps the base close to half the top diameter, which is the standard stability ratio for round commercial tables.
How tall is the table base?
720 mm, which is standard indoor dining height. Finished table height equals 720 mm plus the thickness of the top you fit.
Are table bases supplied without tops?
Yes. These are table bases only. Operators and fit-out contractors pair them with their own tops, which is why the 250 x 250 mm top plate is drilled for standard fixing.
Why cast iron rather than steel tube?
Cast iron concentrates weight low in the foot. A hollow steel base of the same footprint weighs far less and is easier to tip when someone leans on the table edge.
Can the height or finish be changed?
Yes. Height, finish and top plate dimensions are adjustable on OEM and ODM orders. Send your specification and we will confirm it on a production drawing.
Is the base suitable for outdoor terraces?
This model is specified for indoor use. Powder coated cast iron is not rated here for permanent outdoor exposure, so tell us if the tables will sit outside and we will quote a suitable finish.
Request a quotation or a custom drawing
Send your top size, required height, finish and quantity. If TB004 is not the right match for your workpiece, we will prepare a drawing for a base that is.
- 加载中···
Keep in Touch
- Phone
- *Title
- *Content
Keep in Touch
- Phone
- *Title
- *Content